Arduino MATERIA 101 Manual do Utilizador descarregar pdf (Página 12)

12

Assembly Manual

Arduino Materia 101

BasE assEmBly

Fig. 9

Fig. 11

Fig. 10

Fig. 9

Lay the Arduino Mega 2560 board on

the stand-offs and secure the control

board to the base using M3x6 bolts

(3). Once again, be really careful not

to damage the nylon thread.

Fig. 10

Place the Ramps board on the Arduino’s

and connect it through the pins paying

attention not to bend it. Attach heat

sinks (4) to the motor’s driver. Inside

the kit there is another driver that could

be used as a spare part.

ATTENTION: THE HEAT SINK MUST

NOT TOUCH THE PINS.

Fig. 11

Place a 40mm fan with the label

facing downward, the cable pointed

towards the board and connect the

fan to the plug specified on the board,

as you see in the picture (fig. 11).

Paying attention to polarity, + RED –

BLACK, fasten through the threaded

holes at the center of the tray.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Comentários a estes Manuais

Sem comentários